Supermicro X10SLM+-F User Manual page 87

Chapter 4: AMI BIOS
VGA Palette Snoop
Select Enabled to support VGA palette register snooping which will allow a PCI
card that does not contain its own VGA color palette to mimic the color palette of
the video card installed on the motherboard for proper color display. The options
are Disabled and Enabled.
PERR# Generation
Select Enabled to allow a PCI device to generate a PERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
SERR# Generation
Select Enabled to allow a PCI device to generate an SERR number for a PCI Bus
Signal Error Event. The options are Enabled and Disabled.
CPU SLOT6 PCI-E 3.0 X8/X16 OPROM
Use this feature to enable or disable PCIe slot Option ROMs to boot the computer
using a device installed on the slot specified. The options are Disabled, Legacy
and EFI.
CPU SLOT5 PCI-E 3.0 X8 OPROM
Use this feature to enable or disable PCIe slot Option ROMs to boot the computer
using a device installed on the slot specified. The options are Disabled, Legacy
and EFI.
PCH SLOT4 PCI-E 2.0 X2/4 (IN X8) OPROM
Use this feature to enable or disable PCIe slot Option ROMs to boot the computer
using a device installed on the slot specified. The options are Disabled, Legacy
and EFI.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface) and legacy storage OPROM. Select Legacy Only to boot the system using
a legacy device installed in a PCI slot. The options are UEFI Only and Legacy Only.
Other PCI Device ROM Priority
This feature selects a PCI device OPROM to launch for system boot if this device
is not a network, mass storage, or video device. The options are UEFI Only and
Legacy Only.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Select iSCSI for iSCSI Option ROM support which will allow the user to boot the
computer using an iSCSI device installed in a LAN port specified. Select PXE
(Preboot Execution Environment) to boot the computer using a PXE device installed
4-17