Table of Contents
Advertisement
NL
Getting to know the device
control ring
The control ring changes the setting values shown on
the display,
For most selection lists, eg for the temperature, you
have to turn the control ring back again when the
minimum or maximum value is reached. For example,
for heating methods, after the last point, the first
starts again.
Display
The display is structured in such a way that you can read
the statements appropriate to any situation at a glance.
The value you can set is in focus. It is shown in white,
with a white line below it. The value in the background
is shown in gray.
The value in focus can be changed
Focus
directly, without selecting it first.
After the start, the temperature or setting is
always in focus. The white line is also the warm-
up line. This is filled in red.
As long as you change the value in
magnification
focus with the control ring, only this
value is magnified.
ring line
The ring line is located on the outside of the
display.
When you change a value, the ringline shows you where
you are in the list box. Depending on the setting range, the
ring line is either continuous or divided into segments,
depending on the length of the list box.
During use, the ring line fills red in seconds. After
every full minute, the segments are filled again from
the beginning. When the time counts down, a
segment disappears every second.
10
Temperature indication
After the start, the current temperature in the
interior is shown graphically on the display.
Warming line The white line under the temperature becomes
red from left to right as the interior heats up.
When you preheat, the optimum time for
inserting the dish is reached as soon as the
line is completely filled with red.
The heating line is immediately filled in red with setting
settings, eg grill settings.
When the appliance is switched off, the ring line
residual heat
shows the residual heat in the interior. The lower
indication
the residual heat becomes, the darker the ring line
becomes, and eventually it disappears completely.
Note:
Due to thermal inertia, the displayed
temperature may differ slightly from the actual indoor
temperature.
Functions
Your device has several functions that make it easier
to use.
The precise descriptions of these can be found in
the respective chapters.
Function
Heating methods
~" Operating the device"
on page 15
autopilot
~" Dishes"
on page 29
Oven cleaning
~" cleaning function"
on page 22
- - - - - - - -
Usage
There are various finely tuned
heating methods for optimum
preparation of your dishes.
The correct setting values are
already programmed for many dishes.
With the cleaning function, the
interior is cleaned almost
independently.
Advertisement
Table of Contents
