Toro Multi Pro 1200 Service Manual page 187

10.Loosen five (5) cap screws (Item 1) and remove dif-
ferential carrier with L.H. axle shaft assembly (Item 2)
and shims (Item 3) from side cover (Item 4).
11. Loosen cap screws (Item 1) and remove side cover
(Item 2) from transaxle case. Note locations of two dow-
el pins (Item 3) in transaxle case.
12.Inspect side cover for cracks or damage and replace
if necessary.
13.Loosen cap screws (Item 1) and remove R.H. axle
shaft assembly (Item 2) from transaxle case.
14.Slide differential gear assembly (Item 1) from trans-
axle case.
Multi Pro 1200/1250
3
1
2
Page 7 – 31
2
1
4
Figure 35
3
Figure 36
Figure 37
1
Figure 38
Drive Train
1
2