Table of Contents
Advertisement
Available languages
Available languages
4.4. VoIP Settings
After configuring the network, it is necessary to have information from your VoIP
operator in order to be able to make your calls. This device supports up to 3 di-
fferent operator accounts. The information from each operator must be included
in the setup page of the IP telephone using an internet browser (for example,
Internet Explorer
®
Setup via the device
1. Press Menu and, using the navigation keys
2. Using the navigation keys
3. Input your password using the alphanumeric keypad ( factory default: admin )
and press
4. Using the navigation keys
5. Using the navigation keys
and press
6. Using the navigation keys
7. Using the navigation keys
such as the name to be displayed on the screen, identification name to be
displayed on the destination phone, registry name of the SIP server, user name
provided by the SIP server, SIP account password, and server;
8. Input the values for each option using the alphanumeric keypad and press
to save.
Configuration via an internet browser
IP address verification
In order to access the device configuration page, verify the IP address using the
following steps:
» DHCP mode/static IP
1. Press
;
2. Verify the IP number shown on the screen.
» PPPoE mode
When the IP telephone is configured in the PPPoE mode, the user must be connec-
ted to the LAN port of the device in order to be able to access the configuration
page. Check the LAN network address according to the following procedure:
1. Press
;
) or using the device.
;
;
, select Settings and press
,select Advanced Settings and press
, select Accounts and press
, select the account to be activated (1, 2 or 3)
, select the Enable option;
, select one of the 12 options you wish to setup,
;
;
;
43
Advertisement
Table of Contents
