Operation - JBL Simply Cinema SCS135 Owner's Manual

O P E R A T I O N
Move the Master Power
switch (marked "Power" ¡) to
•
the " " (On) position to use the
subwoofer. The SCS135 sub-
woofer will automatically turn
itself on or go into standby
(sleep) mode when left in the
standby mode ("Auto/On"
switch ™ in the "Auto" posi-
tion). When your receiver or
amplifier is off, or is not send-
HIGH LEVEL
+ – – +
L R
OUT
IN
IMPORTANT: CONNECT STRIPED WIRE TO RED ( ) SPEAKER TERMINAL.
SUB 135
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Volume
Volume can be adjusted using
the Subwoofer Level Control £
(above), as shown below.
Subwoofer
Level
MIN MAX
ing program material to the
subwoofer, the subwoofer will
be in standby mode. When the
sub-woofer senses an audio
signal, it will automatically turn
itself on. If the subwoofer does
not sense a signal after
approximately twenty minutes,
it will automatically go into
standby mode.
LINE LEVEL IN
L
LFE
AUTO
R
GREEN: ON
RED: STANDBY
+
POWER
AC 230V~50Hz
When the "Auto/On" switch ™
is switched to the "On" posi-
tion, the subwoofer will remain
on, whether or not program
material is playing.
If you will be away from home
for an extended period of time,
or if the subwoofer will not be
used, switch the Master Power
switch ¡ to the Off position.
™
SUBWOOFER
LEVEL
£
ON
MIN MAX
¡
200 Watts
Subwoofer
Level
MIN MAX
9