Table of Contents
Advertisement
Installing the Light Kit Assembly (cont'd)
4. Securely attach Downlight Socket Plate Assembly to the
Adapter Plate by tightening three screws provided with the
fan. (Figure 4)
INSTALLATION NOTE
If You Are NOT Installing The Light Kit, Go To Next
Page Under "Installing The Lower Housing Assembly"
Section.
5. Install three Candelabra Bulbs (not included - 40 watts
max) in each of the sockets on the Downlight Socket Plate
Assembly. (Figure 5)
IMPORTANT
40 watt bulbs are the maximum wattage allowed to safely
operate the fan.
6. Carefully install the Glass/Frame Light Kit Assembly into
the Adapters' slots. (Figure 6)
6. Securely attach the Glass/Frame Light Kit Assembly by
twisting onto the Adapter plate. Don't overtighten.
(Figure 7)
7. You have now completed the assembly of your ceiling
fan. Restore electrical power.
10
Figure 4
Figure 5
Figure 6
Figure 7
Advertisement
Table of Contents
