Britax EMBLEM User Manual page 39

4. Pull the end of the belly
pad and buckle retainer
out of the slot in the cover
to remove.
5. Turn the buckle retainer
sideways and route the
buckle assembly out of
the belly pad.
Replacing the Harness Buckle
1. Turn the buckle retainer
sideways and route it
through the fabric strip on
the belly pad.
2. Route the belly pad and
buckle retainer through
buckle slot in the cover.
NOTE: Ensure that the
buckle is through the
correct cover slot for the
buckle position.
3. Slide the end of the belly
pad over the comfort
foam on the child seat.
4. Turn the buckle retainer
sideways and route it
through the front buckle
slot and then into the
desired buckle position
(see page 22).
NOTE: Ensure that the
buckle is in the correct
buckle position.
5. Replace the cover.
EMBLEM/ALLEGIANCE Canadian User Guide
37