Advertisement
This manual is intended for persons who engage in maintenance operations, and explains procedures for dis-
assembly and reassembly of the machine, check and maintenance procedures, maintenance reference values,
troubleshooting and outline specifications, etc. Please use this manual as a reference in service activities to
improve maintenance techniques.
Further, please be advised that items contained in this manual are subject to change without notice due to design
modifications, etc.
MACHINE FRONT AND REAR, LEFT AND RIGHT
The end where the dozer blade is mounted is the front and the end with the travel motors is the rear. Also the right
and left sides of the operator when he is seated in the operatorʼs seat are the right and left sides of the machine.
MACHINE SERIAL NUMBER
The machine serial number is stamped on the identification plate. When sending reports and inquiries, and when
ordering parts, etc., be sure to include this number.
MANUAL CONTROL
Information on those to whom this manual is distributed is recorded in the ledger in the section in charge at this
company, so please decide on a person to be in charge of it and control it. When there are updates or additions,
etc., we will notify the person in charge.
SYMBOLS
means "Please refer to the section quoted."
Indicates the tightening torque at the specific section that requires special attention in designing.
Indicates the mass of a part or device.
FOREWORD
0-2
Hide quick links:
Advertisement
