Table of Contents
Advertisement
favourite (the device will have priority
over all other devices to be paired
subsequently). If "No" is selected, the
priority is determined according to the
order of connection. The last device
connected will have the highest priority.
If no device has been registered, you
can access the "Device Manager"
directly from the "Phone" function.
NOTE Up to 20 device can be paired.
In case of an attempt to pair a twenty-
first device a pop-up window will notify
that this is impossible. Remove a
paired device to allow the pairing of a
new one.
NOTE The Radio may change the
track being played by modifying the
from name name of the device in the
Bluetooth® settings of the telephone
(where provided), if the device is by
means of USB after the Bluetooth®
connection. After updating the phone
software, for proper operation, it is
recommended to remove the phone
from the list of devices linked to the
radio, delete the previous system
pairing also from the list of Bluetooth®
devices on the phone and make a new
pairing.
WARNING If the Bluetooth®
connection between mobile phone
and system is lost, consult the mobile
phone handbook.
330
USB SOURCE
There are two USB ports: the first is
located on the dashboard for charging
external devices only, the second is
in the lower part of the dashboard for
transferring data to the Uconnect™
system and for charging external
devices.
When a USB device is plug into
the port on the dashboard with the
radio on, it starts to play the tracks
on the device if the "AutoPlay" is set
to "ON" in the "Audio" menu. If the
"AutoPlay" function is set to OFF and
a smartphone is connected, only
charging the device will be active.
PHONE MODE
Press the "Phone" button on the
display to activate the Phone mode.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Select the desired page on the display
using the bar at the top to:
dial the phone number using the
graphic dial pad on the display;
NOTE The keypad is only active
when the vehicle is stationary. If an
attempt is made to use the keypad
with the vehicle in motion or if driving
is resumed without having completed
engagement, a warning message
will appear on the display and the
operation will be ended.
display and call contacts from the
registers of previous calls;
display and call the contacts in the
phonebook of the mobile phone;
view received text messages;
view the connected devices.
The mobile phone audio is transmitted
through the sound system of the
vehicle; the system automatically mutes
the Uconnect™ system audio when
the Phone function is used.
Pairing a mobile phone
WARNING Carry out this operation only
with vehicle stationary and in safety
conditions; this function is deactivated
when the vehicle is moving.
To pair a mobile phone, see the
procedure in "Pairing a Bluetooth ®
audio device" in this chapter.
"Double telephone" feature
The Uconnect™ system allows
simultaneous Bluetooth® connection
to two telephones. Only one of the two
connected devices can play multimedia
content via Bluetooth®.
WARNING The "double telephone"
feature is not available while using the
Advertisement
Table of Contents
