Table of Contents
Advertisement
306
tighten the knob onto the screw to
secure the bracket fig. 307;
307
rest the bracket on the inside of the
alloy rim fig. 308;
308
F1A0424
use the Allen key to tighten the three
special screws on the nuts of the
bracket fig. 309 and secure the rim;
F1A0425
309
introduce the assembly tool fig. 301
provided with the suitable extension
(B) fig. 300 on the screw (A) fig. 300 of
the spare wheel housing manoeuvring
device and turn clockwise to lift the
spare wheel back up until it is fully
supported in its housing beneath
the floor, checking that the coupling
confirmation reference (D) fig. 301
appears on the device;
check that the position of the
replaced wheel under the platform is
correct (the lifting system is equipped
with a clutch to limit the end of the
stroke, incorrect positioning may
jeopardise safety);
place the removal tools back in the
tool bag / compartment;
F1A0426
place the tool box / compartment in
its housing under the passenger seat.
203) 204)
WARNING
193) Use your hazard lights, warning
triangle, etc to show that your vehicle is
stationary. Passengers should get out
of the vehicle, particularly if it is heavily
loaded, and wait for the wheel to be
changed away from the traffic. Engage
the parking brake. In the event of a wheel
change on a slope or on unsurfaced
roads, put any object as stop under the
F1A0385
wheels.
194) The spare wheel supplied (for
versions/markets, where provided) is
specific for your vehicle. Therefore, it must
not be used on other models. Do not use
spare wheels of other models on your
vehicle. The wheel bolts are specific for
your vehicle: do not use them on different
models and do not use bolts from other
models on your vehicle.
249
Advertisement
Table of Contents
