Gebwell T3 Installation, Operation And Maintenance Manual page 7

Inspected Description
ELECTRICITY:
Building fuses
Heat pump fuses
Phase sequence
Power supply
Adjustment group(s)
Supply temperature sensor(s)
Room sensor
Outdoor temperature sensor
CONTROLLER:
Room set point for the heating circuit
Heating curve gradient set
Minimum set point for supply water to the
heating circuit
Maximum set point for supply water to the
heating circuit
GENERAL:
Wiring in accordance with the installation
instructions
Connection seals
Device started up in accordance with the
instructions
Operation of the machine monitored on site
for 30 minutes
GUIDANCE FOR THE END USER:
Adding fluid to the brine circuit
Increasing the pressure of the heating
system
Setting the heating adjustment curve
App user interface guidance
NOTE! By registering the heat pump within six months from its installation, you will get a five-year warranty for the it.
Register the installed heat pump on our website at www.gebwell.fi/rekisteroi-maalampopumppu/. You can also access the
registration page on a smartphone by using the QR code below. If you are unable to register the heat pump, call Gebwell Ltd
on +358 20 1230 800.
www.gebwell.fi/rekisteroi-maalampopumppu/
v1-1 12082021
Comment
Checked by
Checked by
Checked by
Checked by
(date)
(date)
(date)
(date)
7