Passwords; Power - eMachines EL1200 Reference Manual

•
•
•
•
•
•
•
•

Passwords

•

Power

•
A DVD movie will not play
Make sure that you have a DVD drive. To identify
your drive type, see "Identifying optical drive
types" on page 19.
Make sure that the disc label is facing up, then
try again.
Try a different disc. Occasionally discs are flawed
or become scratched and cannot be read by the
DVD drive.
Shut down and restart your computer.
Clean the disc.
Reinstall the device driver.
Make sure that the DVD program has been
installed on your computer.
DVDs and DVD drives contain
help control DVD title exports and help reduce
illegal disc distribution. To be able to play a DVD,
the disc's regional code and your DVD drive's
regional code must match.
The regional code on your DVD drive is
determined by your computer's delivery address.
The regional code for the United States and
Canada is 1. The regional code for Mexico is 4.
Your DVD drive's regional code must match the
regional code for the disc. The regional code for
the disc is on the disc, disc documentation, or disc
packaging.
If the DVD movie does not play, the disc's
regional code and your DVD drive's regional code
may not match.
Your computer does not accept your password
Make sure that C
retype the password.
Your computer will not turn on
Make sure that the power cord is connected to
an AC power source and to your computer, and
that your computer is turned on.
regional codes
is turned off, then
APS LOCK
that
41