Sound Settings - Samsung BD-JM51 User Manual

Resolution according to the output
BD Wise (Samsung TVs only)
mode
BD Wise is Samsung's latest inter-
Blu-ray Disc/E-contents/Digital
connectivity feature. ●
Contents playback
When you connect a Samsung player
and a Samsung TV with BD Wise to
each other via HDMI, and BD Wise
is on in both the player and TV, the
player outputs video at the video
Setup
resolution and frame rate of the Blu-
ray Disc/DVD.
✎
NOTES
When BD Wise is on, the Resolution
■
setting automatically defaults to BD
Wise and BD Wise appears in the
Resolution menu.
1080p@60F
If the player is connected to a device
(Movie Frame :
■
that does not support BD Wise, you
cannot use the BD Wise function.
Movie Frame :
For the proper operation of BD
■
Auto (24Fs)
Wise, set the BD Wise menu of
both the player and the TV to On.
Resolution
Lets you set the output resolution
DVD playback
of the HDMI video signal to Auto,
●
1080p, 1080i, 720p, or 480p. The
number indicates the number of
Setup
lines of video per frame. The i and p
indicate interlaced and progressive
scan, respectively. The more lines, the
higher the quality.
✎
NOTES
■
HDMI / connected
Output
HDMI Mode
E-contents/
Blu-ray
Digital
Disc
contents
■
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Max.
Auto Resolution of Resolution of
TV input TV input
1080p@60F 1080p@60F
Off)
■
1080p@24F 1080p@24F
1080i 1080i 1080i
■
720p 720p 720p
480p 480p 480p
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature
HDMI / connected
Output to Auto allows you to adjust the
player's HDMI output to 24 frames per
HDMI Mode
second for improved picture quality.
BD Wise 480i
You can enjoy the Movie Frame (24Fs)
Max. Resolution of TV
feature only on a TV supporting this
Auto
input
frame rate. You can select Movie
Frame only when the player is in the
1080p 1080p
HDMI 1080p output resolution mode.
1080i 1080i
720p 720p
480p 480p
HDMI Color Format
If the TV you connected to the player
does not support Movie Frame or
Lets you set the color space format
the resolution you selected, the
for HDMI output to match the
message "If no pictures are shown
capabilities of the connected device
after selecting 'Yes', please wait for
(TV, monitor, etc).
15 seconds to return to the previous
resolution." appears. If you select
Yes, the TV's screen will go blank for HDMI Deep Color
15 seconds, and then the resolution
will revert to the previous resolution Lets you output video from the
automatically.
HDMI OUT jack with Deep Color.
If the screen stays blank after you have Deep Color provides more accurate
changed the resolution, remove all
color reproduction with greater color

discs, and then press and hold the
depth.
button on the front of the player for
more than 5 seconds. All settings are
Progressive Mode
restored to the factory default. Access
the Resolution function and reset the
Lets you improve picture quality when
output resolution to a resolution that
viewing DVDs.
is compatible with your TV.
When the factory default settings
are restored, all stored user BD data
is deleted.
The Blu-ray Disc must have the 24
Digital Output
frame feature for the player to use
the Movie Frame (24Fs) mode.
Lets you select the digital audio output
format that is suitable for your TV or AV
Receiver. For more details, please refer
to the Digital Output Selection table on
the next page.

Sound Settings

11