Table of Contents
Advertisement
5. If you have connected a LAN cable to
the Blu-ray player, the Blu-ray player
automatically verifies your wired network.
automatically verifies your wired network.
Initial Settings I Network - Wired
Choose the method to configure Internet Protocol (IP). Please make
sure that the Ethernet cable is connected.
Auto : Configure IP automatically
Auto
Manual
a Previous d Skip ?\ Move " Select
✎
NOTE
If you have no network, select Skip
■
by pressing the BLUE (D) button,
and then go to Step 7.
6. After the player verifies the network,
press the E button.
7. The Initial Settings Complete window
appears and remains on the screen for a few
moments. Then, the Home screen appears.
✎
NOTES
1
The Home screen will not appear if
■
you do not configure the player's
settings during Setup, except as
noted below.
If you press the BLUE (D) button
■
2
during network setup, you can
access the Home screen even if the
network setup is not completed yet.
If you do not complete network set
■
1
up during the Initial Setup, you can
do it later. See page 13.
2
When you return to the Home
■
screen, the full screen mode is
cancelled automatically.
If you want to display the Setup
■
3
screen again to make changes, press
the
button on the front panel of
the player for more than 5 seconds
with no disc inserted. This resets the
4
player to its default settings.
10
After the Setup process is complete, you
Home Menu
■
●
can operate the HDMI-CEC function.
5
If you want to use an Anynet+
■
(HDMI-CEC) function to aid in the
PLAY DISC
initial set up process, please follow
the instructions below.
6
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
No Disc
Samsung TV using an HDMI Cable.
7
2) Set the Anynet+(HDMI-CEC) feature
App 1
to On in both the TV and the player.
3) Set the TV to the Setup Procedure.
8
If you leave the player in the stop
■
mode for more than 5 minutes
1
without using it, a screen saver will
appear on your TV. If the player is
2
left in the screen saver mode for
3
more than 25 minutes, the power
will automatically turn off.
4
Menu Navigation
5
6
7
8
✎
NOTE
3
The Videos, Photos, and Music
■
options require that you have an
4
appropriate disc in the player or a USB
flash device attached to the player.
HOME Button : Press to move to
the Home menu.
Accessing the Settings Menu
RETURN Button : Return to the
previous menu.
To access the Settings menu and sub-
menus, follow these steps:
E (Enter) / DIRECTION Button :
Move the cursor or select an item.
1. Press the POWER button.
Activate the currently selected item.
The Home Menu appears.
Confirm a setting.
2. Press the ▲▼◀▶ buttons to
EXIT Button : Press to exit the
select Settings, and then press the
current menu.
E button.
3. Press the ▲▼ buttons to select
the desired submenu, and then
1
press the E button.
PHOTOS
VIDEOS
MUSIC
4. Press the ▲▼ buttons to select
2
the desired item, and then press
the E button.
5. Press the EXIT button to exit the
menu.
3
App 2
App 3
App 4
App 5
More
Change Device
Settings
✎
NOTES
4
The access steps may differ depending
■
on the menu you selected. The OSD
Access and play VIDEOS.
(On Screen Display) may change in
Access and play MUSIC.
this player after you upgrade the
software version.
Access and change SETTINGS.
Change the Source Device.
Picture Settings
Access and view PHOTOS.
You can configure various display
Play a DISC.
options such as the TV Aspect Ratio,
Access and use APPLICATIONS.
Resolution, etc.
Access MORE APPLICATIONS.
TV Aspect Ratio
Depending on the type of television
you have, you may want to adjust the
screen size setting.
✎
NOTES
Depending on the disc type, some
■
aspect ratios may not be available.
If you select an aspect ratio and
■
option which is different than the
aspect ratio of your TV screen, the
picture might appear to be distorted.
Hide quick links:
Advertisement
Table of Contents
