Sound Settings - Samsung BD-J5500 User Manual

TV Aspect Ratio
Depending on the type of television you
have, you may want to adjust the screen size
setting.
NOTES
✎
Depending on the disc type, some aspect
`
ratios may not be available.
If you select an aspect ratio and option which is
`
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVDs.
NOTES
✎
When BD Wise is on, the Resolution setting
`
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
If the player is connected to a device that does not
`
support BD Wise, you cannot use the BD Wise function.
For proper operation of BD Wise, set the BD
`
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of the
HDMI video signal to Auto, 1080p, 1080i,
720p or 576p/480p. The number indicates
the number of lines of video per frame. The
i and p indicate interlaced and progressive
scan, respectively. The more lines, the higher
the quality.
Resolution according to the output
mode
Blu-ray Disc/E-contents/Digital Contents
•
playback
HDMI / connected
Output
HDMI Mode
E-contents/
Setup
Blu-ray Disc Digital
contents
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Resolution Max. Resolution
Auto
of TV input of TV input
1080p@60F
1080p@60F 1080p@60F
(Movie Frame : Off)
Movie Frame :
1080p@24F 1080p@24F
Auto (24 Fps)
1080i 1080i 1080i
720p 720p 720p
576p/480p 576p/480p 576p/480p
DVD playback
•
HDMI / connected
Output
Setup
HDMI Mode
BD Wise 576i/480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
576p/480p 576p/480p
NOTES
✎
If the TV you connected to the player does not
`
support Movie Frame or the resolution you
selected, the message "If no pictures are shown
after selecting 'Yes', please wait for 15 seconds
to return to the previous resolution. " appears. If
you select Yes, the TV's screen will go blank for
15 seconds, and then the resolution will revert
to the previous resolution automatically.
If the screen stays blank after you have
`
changed the resolution, remove all discs,
and then press and hold the ^ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
When the factory default settings are restored,
`
all stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame feature
`
for the player to use the Movie Frame (24 Fps)
mode.
Movie Frame (24 Fps)
Setting the Movie Frame (24 Fps) feature to
Auto allows you to adjust the player's HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24 Fps)
feature only on a TV supporting this frame
rate. You can select Movie Frame only when
the player is in the HDMI 1080p output
resolution modes.
HDMI Colour Format
Lets you set the colour space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HDMI Deep Colour
Lets you output video from the HDMI OUT
jack with Deep Colour. Deep Colour provides
more accurate colour reproduction with
greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.

Sound Settings

Digital Output
Lets you select the digital audio output format
that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output
Selection table.
11