Network Settings - Samsung BD-JM51 User Manual

Network Settings

4. In the Internet Protocol Setup field,
Please contact your ISP to find out if
your IP address is static or dynamic. 5. The Auto Function acquires and fills in
If it is dynamic - and most are - we
recommend using the Auto procedure
for network setup. This is easiest and ✎
will work in the majority of cases.
If it is static, you must use the manual
set up procedure.
6. After the Network Function has
Network setup directions start below.
✎
NOTE
7. Select Network Test, and then press E
This unit can only be connected to
■
a Network via a wired connection.
8. When the Network Test is complete,
Wired Network Settings
1. In the Home menu, press the ▲▼◀▶
9. If the Network Function does not
buttons to select Settings, and then
press the E button.
2. Press the ▼▲ buttons to select
Manual Network Setup
Network, and then press the E
button.
Before you start manual network setup,
you need the network setting values.
3. Press the ▼▲ buttons to select Wired
Network Settings, and then press the
To get the network setting values,
E button. The Wired Network Settings
contact your ISP (Internet Service
screen appears. pp .
Provider) or your network administrator.
Settings
To enter the Network Settings into
Wired Network Settings
Picture
your player, follow these steps:
▶
Internet Protocol Setup : Auto
Sound
IP Address : 0 0 0 0
Network
Subnet Mask : 0 0 0 0 1. In the Home menu, press the ▼▲◀▶
System
Gateway : 0 0 0 0
Language
DNS : Auto
Security
DNS Server : 0 0 0 0
General
Support > Move " Select ' Return 2. Press the ▲▼ buttons to select
3. Press the ▼▲ buttons to select Wired
Network Settings, and then press the
select Auto if it is not selected. (Press
E button. The Wired Network Settings
E to select Auto, and then press E .)
screen appears.
4. Select the Internet Protocol Setup field,
the values for IP Address, Subnet Mask,
and then press the E button.
etc., automatically.
5. Press the ▲▼ buttons to select Manual,
and then press the E button.
NOTE
6. Press the ▼ button to go to the first
This process can take up to five
■
entry field (IP Address).
minutes.
7. Use the number buttons on your
remote to enter numbers.
acquired the network values, press the
8. When done with each field, use the ▶
RETURN button.
button to move to the next field. You
can also use the other arrow buttons to
to ensure the player has connected to
move up, down, and back.
your network.
9. Enter the IP Address, Subnet Mask, and
Gateway values in the same way.
press the RETURN twice to return to the
Main Menu. 10. Press the ▼ button to go to DNS.
11. Press the ▼ button to go to the first
acquire the network values, go to the
DNS entry field.
directions for Manual Setup.
12. Enter the numbers as above.
13. Press the RETURN button on your
remote control.
14. Run a Network Test to ensure the player
has connected to your network.
Network Test
Use this menu item to check whether
your network connection is working
or not.
Network Status
buttons to select Settings, and then
Use to check whether a connection to
press the E button.
a network and the Internet has been
established.
Network, and then press the E
button.
Device Name
The Device Name function allows
you to change the player's name by
selecting from a device name list.
BD-Live Internet Connection
Set to allow or prohibit an Internet
connection when you use the BD-
LIVE service.
Allow (All) : The Internet
●
connection is allowed for all BD-
LIVE contents.
Allow (Valid Only) : The Internet
●
connection is allowed only for BD-
LIVE contents containing a valid
certificate.
Prohibit : No Internet connection is
●
allowed for any BD-LIVE content.
✎
NOTES
What is a valid certificate?
■
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc, the
server uses the transmitted data to
check if the disc is valid and sends
the certificate back to the player.
The Internet connection may be
■
restricted while you are using BD-
LIVE contents.
13