Quick Links



Table of Contents

Summary of Contents for AEG BAC218E

  • Page 1 BAC218E...
  • Page 2 mportant! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modifications.
  • Page 3 1 - Safety valve 2 - Auto on/off switch 3 - Tank pressure gauge 4 - Carrying handle 5 - Regulator pressure gauge 6 - Quick connect coupler 7 - Pressure regulator knob 8 - Drain valve 9 - Hose wrap strap 10 - Air filter assembly Fig.
  • Page 4 Fig. 3 Fig. 5 Fig. 7 1 - Air filter 2 - Air filter cover 3 - Air filter housing 1 - Safety valve 2 - Pull to release pressure 1 - Auto on/off switch Fig. 4 Fig. 6 1 - Auto on/off switch 2 - Air hose 3 - Pressure regulator knob 4 - Pull knob and turn clockwise to increase...
  • Page 5: Technical Data

    L1850R BL18DP-X5 L1860R L1860B Use AEG 18V battery and charger only for which it was intended. WARNING! Use the right tool. Do not force small tools to do the job of a heavy Read all safety warnings and all instructions. Failure to follow duty tool.
  • Page 6: Air Compressor Safety Warnings

    checking to see that keys and adjusting wrenches are removed Risk of bursting. Do not adjust regulator to result in output from the tool before turning it on. pressure greater than marked maximum pressure of attachment. Do not use at pressure greater than 8.3 bar (120 psi). Avoid unintentional starting.
  • Page 7: Operation

    Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also. Do not modify or attempt to repair a battery pack that has been damaged.
  • Page 8: Break-In Period

    CONNECTING/DISCONNECTING AIR HOSE (HOSE NOT WARNING PROVIDED) Always wear eye protection with side shields. Failure to do so See Figure 2. could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING Never exceed the air tool’s pressure rating as recommended by WARNING Do not use any attachments or accessories not recommended by the manufacturer of the product.
  • Page 9: Draining The Tank

    WARNING WARNING Risk of bursting. Do not adjust pressure regulator knob to result Turn off the air compressor, remove battery packs, and release in output pressure greater than marked maximum pressure of all air from the tank before servicing. Failure to depressurise tank before attempting to remove valve could cause serious personal greater than 8.3 bar (120 psi).
  • Page 10: General Maintenance

    Use only AEG accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). If needed, an exploded view of the product can be ordered. Please state the Article No.
  • Page 11: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Compressor will not run Batteries are not charged Recharge both battery packs. Pressure switch bad Take compressor to service centre. Tank is full of air Compressor will turn on when tank pressure drops to cut-in pressure. Internal overload switch is tripped Turn off compressor and allow unit to cool;...
  • Page 12 Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 961096341-01B...

This manual is also suitable for:


Table of Contents