Table of Contents
Advertisement
TECHNICAL DATA
18V BRUSHLESS AIR COMPRESSOR
Rated motor power
Rated current
Air outlets
Quick connector fitting size
Weight
Input
Air tank capacity
Free air delivery
Maximum air pressure
Working pressure range
Pressure gauge
Maximum rotational shaft speed
BATTERY AND CHARGER
Compatible battery pack
(not included)
L1815R
L1820R
L1825R
L1830R
L1840R
L1850R
L1860R
L1860B
Use AEG 18V battery and charger only
WARNING!
Read all safety warnings and all instructions. Failure to follow
or serious injury.
Save all warnings and instructions for future reference.
GENERAL SAFETY WARNINGS
WARNING
When using electric tools, basic safety precautions should
personal injury. Read all these instructions before attempting to
operate this product and save these instructions.
Keep work area clear. Cluttered areas and benches invite injuries.
Consider work area environment. Do not expose tools to rain. Do
not use tools in damp or wet locations. Keep work area well lit. Do
Guard against electric shock. Avoid body contact with earthed
or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
Keep other persons away. Do not let persons, especially children,
be involved in the work, touch the tool or the extension cord, and
keep them away from the work area.
Store idle tools. When not in use, tools should be stored in a dry
locked-up place, out of reach of children.
Do not force the tool. It will do the job better and safer at the rate
Compatible charger
(not included)
AL1218G
BL1218
BLK1218
BL18DP-X5
for which it was intended.
Use the right tool. Do not force small tools to do the job of a heavy
duty tool. Do not use tools for purposes not intended, for example,
do not use circular saws to cut tree limbs or logs.
Dress properly. Do not wear loose clothing or jewellery, they can
be caught in moving parts. Non-skid footwear is recommended
when working outdoors. Wear protective hair covering to contain
long hair.
Use protective equipment. Use safety glasses. Use face or dust
mask if working operations create dust.
Connect dust extraction equipment. If the tool is provided for
the connection of dust extraction and collecting equipment, ensure
these are connected and properly used.
Do not abuse the cord. Never yank the cord to disconnect it from
the socket. Keep the cord away from heat, oil and sharp edges.
Secure work. Where possible, use clamps or a vice to hold the
work. It is safer than using your hand.
Do not overreach. Keep proper footing and balance at all times.
Maintain tools with care. Keep cutting tools sharp and clean for
better and safer performance. Follow instruction for lubricating
and changing accessories. Inspect tool cords periodically and if
damaged, have them repaired by an authorised service facility.
Inspect extension cords periodically and replace if damaged. Keep
handles dry, clean and free from oil and grease.
Disconnect tools. When not in use, before servicing and when
changing accessories such as blades, bits and cutters, disconnect
tools from the power supply.
Remove adjusting keys and wrenches. Form the habit of
5
1 pc, 6.35mm (1/4") BSP thread quick
connector/coupler (suitable for NITTO fitments)
6.35 mm (1/4") BSP thread
6.2 - 8.3 bar (90-120 psi)
2 pcs, 42mm (1.7") diameter
BAC218E
0.4 Kw
21 A
8.7 kg
18V DC
3.8 L
30.8 L/min
8.3 bar (120 psi)
12000 min
-1
5
Advertisement
Table of Contents
