Table Of Contents; Symbols - Redback E142C Operation Manual

TABLE OF CONTENTS

• Symbols................................1
•
Safety Instructions
and Warnings....................... 2
• Product Specifications............7
• Assembly and Operation.........7
• Charging The Battery..............10
• Exploded View and Part List....11
• Maintenance and Care...........12
• Disposal..............................13
• Guarantee/Warranty..............13
• Declaration of Conformity.......14

SYMBOLS

General Safety Warnings
1. After release the On/Off
switch, the cutter bar
continues running briefly.
Risk of injury!
2. To protect against injury from
the cutter blade, have a
specialist garage perform all
work such as replacing or
regrinding the cutter blade
(special tools required).
3. Protect the battery contacts
when the battery is not being
used. Loose metal parts may
short-circuit the contacts -
Explosion and fire hazard!
1
Before switching the power on,
read the operating manual. Read
all safety warnings and all
instructions including the the
currently valid site rules and the
regulations for the prevention of
accidents. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
Remove the safety key before
carrying out any work on the unit
and before leaving the unit.
Sharp cutting tool! Keep hands
and feet away from the cutter bar!
other electrical products into the
household waste, fire, or water.
Recycle to protect
the environment.
Do not throw
batteries and