Advertisement
Quick Links
Remote control functionality
Technical assistance
If you need assistance setting up or using your Gator product now or in the future, call Gator
Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Gator manuals/software,
please visit the http://gatordriverassist.com website and click on 'Firmware & Manuals" for
information on where to find the manuals/software.
This manual is considered correct at time of printing but is subject to change. For latest manuals
and updates refer to the website.
Copyright © 2017 by TDJ Australia
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in
any form or by any means, including photocopying, recording, copying or other electronic or
mechanical methods, without the prior written permission of the author.
www.gatordriverassist.com
1. Power ON/Off
2. Up
3. Left
4. Down
5. Right
6. Menu
7. Mode select
8. Direct Channel select
GT704HD
7" Quad display AHD Monitor
with Heavy Duty AHD Camera
Advertisement
Related Manuals for Gator TRADE Series
Summary of Contents for Gator TRADE Series
- Page 1 8. Direct Channel select 7” Quad display AHD Monitor with Heavy Duty AHD Camera Technical assistance If you need assistance setting up or using your Gator product now or in the future, call Gator Support. Australia TEL: 03 – 8587 8898 FAX: 03 –...
- Page 2 Inclusions Monitor functionality & settings 1 x Hi-Resolution Monitor 1 x CMOS camera 1 x Wire harness 1 x Sun shade 1 x U-bracket 4 x U-bracket screws 1 x Remote controller Product structure CH1/ CH2/ CH3/ CH4/ 1. Power ON/Off 2.
- Page 3 Menu structure 4. TV mode: NTSC or PAL selectable Press the (Menu) Button once to enter the menu system. Use the Ch3 and Ch4 5. Turnover: Ch1/ Ch2/ Ch3/ Ch4. Use the Ch3 and Ch4 to select Channel. Ch2 navigate up or down the menu. Use the Ch3 and Ch4 buttons to navigate within the button to turn on or off.
- Page 4 Quad wiring diagram Trigger Note: When connecting the main harness to the monitor, firmly press together to 10 metre extension included ensure plug is fully recessed. Trigger AV 4 trigger connect to right AV2 Trigger connect to signal bulb reverse bulb. Refer diagram for nding polarity.
- Page 5 How to find reversing wires to trigger or power backup camera systems. carefully strip both wires sheaths back to expose the wires core making sure you keep them separate and away from the cars chassis to avoid any shorts). You should also We recommend that you wire up the triggers as the last part of your installation (after the make sure the globe it self is not resting on something that could be harmed by extreme systems monitor has been wired) this is so that you can use the system as a safe way to test...
- Page 6 GT704HD configurations Turn signal activated used as blind spot detection. Having two cameras at the back, one camera can be optimised for parking (top down view) whilst the other can look backwards and be used as a rear-view mirror substitute. This system comes with one camera as illustrated above, however it is capable of running up to 4 cameras and can cover a very large array of vehicle requirements.
Need help?
Do you have a question about the TRADE Series and is the answer not in the manual?
Questions and answers