Table of Contents
Advertisement
Quick Links
Remote control functionality
Technical assistance
If you need assistance setting up or using your Gator product now or in the future, call Gator
Support.
Australia
TEL: 03 – 8587 8898
FAX: 03 – 8587 8866
Mon-Fri 9am – 5pm AEST
Please retain this user guide for future reference.
If you would like to download a digital copy of this manual, or other Gator manuals/software,
please visit the http://gatordriverassist.com website and click on 'Firmware & Manuals" for
information on where to find the manuals/software.
This manual is considered correct at time of printing but is subject to change. For latest manuals
and updates refer to the website.
Copyright © 2017 by TDJ Australia
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in
any form or by any means, including photocopying, recording, copying or other electronic or
mechanical methods, without the prior written permission of the author.
www.gatordriverassist.com
1. Power ON/Off
2. Up
3. Left
4. Down
5. Right
6. Menu
7. Split image/View switch
8. Full screen display of the selected channel
GT704SD
7" Quad-Display Monitor with Heavy Duty Camera
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gator GT7045D TRADE Series
Summary of Contents for Gator GT7045D TRADE Series
- Page 1 8. Full screen display of the selected channel 7” Quad-Display Monitor with Heavy Duty Camera Technical assistance If you need assistance setting up or using your Gator product now or in the future, call Gator Support. Australia TEL: 03 – 8587 8898 FAX: 03 –...
- Page 2 Inclusions Monitor functionality & settings 1 x Hi-Resolution Monitor 1 x CMOS camera 1 x Wire harness 1 x Sun shade 1 x U-bracket 4 x U-bracket screws 1 x Remote controller Product structure 1. Power ON/Off 2. Camera input viewing modes. 3.
- Page 3 Menu structure Show mode: When selected on each channel will be labled on screen with its image. For example: Ch2 will be labeled "Back” Ch1 will be labeled "Front". When pressing the buttons on this unit be sure to hold the button down long enough for the unit to register.
- Page 4 Quad wiring diagram Trigger Note: When connecting the main harness to the monitor, firmly press together to 10 metre extension included ensure plug is fully recessed. Trigger AV 4 trigger connect to right AV2 Trigger connect to signal bulb reverse bulb. Refer diagram for nding polarity.
- Page 5 How to find reversing wires to trigger or power backup camera systems. carefully strip both wires sheaths back to expose the wires core making sure you keep them separate and away from the cars chassis to avoid any shorts). You should also We recommend that you wire up the triggers as the last part of your installation (after the make sure the globe it self is not resting on something that could be harmed by extreme systems monitor has been wired) this is so that you can use the system as a safe way to test...
- Page 6 GT704SD configurations Turn signal activated used as blind spot detection. Having two cameras at the back, one camera can be optimised for parking (top down view) whilst the other can look backwards and be used as a rear-view mirror substitute. This system comes with one camera as illustrated above, however it is capable of running up to 4 cameras and can cover a very large array of vehicle requirements.
Need help?
Do you have a question about the GT7045D TRADE Series and is the answer not in the manual?
Questions and answers