Honda HRX537C Owner's Manual page 64

9. TROUBLESHOOTING
Loss of Power
6. Take mower to a
Honda dealer, or refer
to shop manual.
VIBRATION PROBLEMS
Excessive Vibration
1. Check mower deck and
blades.
2. Take mower to a
Honda dealer.
MOWING AND BAGGING PROBLEMS
Poor Cut Quality or Poor
Moving/Bagging
Performance
1. Check that the throttle
lever is in the fast
position.
2. Reduce forward speed. Mower is moving too fast
3. Check cutting height
adjustment levers.
4. Check grass bag (if
equipped).
5. Check mower deck and
blade(s).
64
Possible Cause
Fuel filter clogged,
carburetor malfunction,
ignition malfunction, valves
stuck, etc.
Possible Cause
Grass and debris lodged
under mower deck.
Blade(s) loose, bent,
damaged, or unbalanced
by improper sharpening.
Mechanical damage, such
as a bent crankshaft.
Possible Cause
Engine speed is too slow to
cut well.
for lawn conditions.
Adjustment levers set at
different positions.
Grass bag overfilled or
clogged.
Mower deck clogged.
Blades dull, worn, or
damaged.
Wrong blade(s) installed.
Correction
Replace or repair faulty
components.
Correction
Clean out mower deck
(p. 33).
Tighten loose blade bolts.
Replace damaged blades
(p. 53–54).
Replace or repair faulty
components.
Correction
Move throttle lever to the
fast position (p. 8).
Shift to slow speed (p. 28),
or push slower.
Set all levers to the same
cutting height position
(p. 19).
Empty grass bag. Wash
grass bag if clogged with
dirt (p. 55).
Clean out the mower deck
(p. 33).
Sharpen or replace
blade(s) (p. 53–54).
Install correct blades
(p. 53–54).
E