5-2-6. Tape Running System and Tape Cleaner Cleaning
Warning
The tape cleaner has a sharp edge. Do not touch the edge with bare hands. Pay
careful attention when cleaning the tape cleaner.
Tools
. Cleaning cloth: 3-184-527-01
. Cleaning fluid: 9-919-573-01
Procedures
1. Wipe the surface of the tape cleaner using a paper (such as a sheet of paper of
this manual) to chip the magnetic powder adhered on the tape cleaner.
w
Do not touch the edge portion of the tape cleaner with bare hands.
Pay careful not to damage the tape cleaner.
2. Clean the tape running surfaces (shaded portions in the figure) of each guide and
the tape cleaner with cleaning cloth moistened with a cleaning fluid.
3. After cleaning, clean them with a dry cleaning cloth two or three times.
Pinch roller
TG-6
TG-5
TG-0
Tape cleaner
TG-2
(Entrance guide)
DNW-A30/A30P
DNW-30/30P
Capstan
TG-1
(S-TEN)
(Threading end mode)
Tape Running System and Tape Cleaner Cleaning
TG-4
TG-3(Exit guide)
TG-7
5-2. Cleaning
TG-8(T-TEN)
TG-9
Slant guide
TG-10
5-9