Audio Settings - Pioneer AVH-220EX Operation Manual

Audio settings

The menu items vary according to the source. Some of the menu items become
unavailable when the volume is muted.
Menu Item
[Graphic EQ]
[S.Bass] [Powerful]
[Natural] [Vocal] [Flat]
[Custom1] [Custom2]
[Fader/Balance]
[Source Level Adjuster]
[-4] to [+4]
[Subwoofer]
[On] [Off]
Description
Select or customize the equalizer curve.
Select a curve that you want to use as the basis of customizing
then touch the frequency that you want to adjust.
TIPS
• If you make adjustments when a curve [S.Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equalizer curve settings
will be changed to [Custom1] mandatorily.
• If you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
• [Custom1] and [Custom2] curves can be created common to all sources.
Touch or to adjust the front/rear speaker balance. Set
[Front] and [Rear] to [0] when using a dual speaker system.
Touch or to adjust the left/right speaker balance.
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
Adjust the volume level of each source to prevent radical
changes in volume when switching between sources other
than FM.
Touch or to adjust the source volume after
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
Select enable or disable subwoofer output from this
product.
- 41 -