Advertisement
B
1
2.
5.
.
5
1. Push support & basepad onto bottom edge of glass toward outer end of screen.
2. Carefully lift screen into position & push into wall profile. Check bottom hinge
bracket is sitting on bath rim & adjust screen for plumb.
3. From inside enclosure, using wall rail holes as a guide, drill (dia 2,8mm) fit cup
washer & screw main screen to wall rail using 3,5 x 10 long pan head screws.
Push on decorative cover caps (3 places) & fit Wall Rail top cap.
4. Once secure, move screen inward over bathtub, remove glass support / basepad &
fit bottom seal (see B2).
5. With screen pushed inward over bathtub, apply continuous bead of silicone
sealant as indicated EXTERNALLY ONLY.
2.
4.
1.
3.
3.
Select appropriate top
cap (left/right) & fit to
top of Wall Rail
Advertisement
