Advertisement
Standard Size
SS10 / SS11
SS30 / SS33
SS50 / SS55
A
The use of good quality silicone sealant
& cleaning / degreasing of all joint areas is recommended.
Lakes fully reversible Single Panel Bathscreen for fitting
Ensure bath rim is level & that bath / wall (tile) joints are sealed & cured
over entire length of bath sides (See Fig A) prior to fitting screen.
DO NOT SEAL BATH EDGES UPTO A FITTED SCREEN !
A
Measure & mark wall rail position.
Wall rail orientation : Cross holes to inside (curved face outermost).
Mark fixing hole positions, drill, plug & affix wall rail.
(Back face of Wall profile may be siliconed before mounting).
Adjustment (A)
Tools Required
800 to 825mm
860 to 885mm
800 to 825mm
left or right handed to suitable bathtub.
Spirit Level (with vertical 'bubble')
Tape
Measure
Dia 3mm
Dia 2,8mm
HSS Drill Bit
HSS Drill Bit
Ensure continuous silicone sealant bead as indicated
before fitting wall rail.
must be positioned adjacent to the inner edge of the
bath rim to ensure effectiveness of the bottom
seal / drip strip.
Dia 8mm
Tile / Masonry
Drill Bit
Pencil
Screwdriver (Pozi Drive)
Good quality Silicone
Sealant & applicator
For best performance, screen
dia 5 x 60 lg
Advertisement
