Initial Settings; Initial Setup; Clock Settings - JVC KW-V820BTM Instruction Manual

INITIAL SETTINGS

Initial setup

When you power on the unit for the first time, the
initial setting screen appears.
• You can also change the settings on the <SETUP>
screen. (Page 53)
1
Perform the initial settings.
Touch the desired item to configure the setting.
• You can scroll the screen by touching [J]/[K]
to show more items.
• If another setting screen is displayed, set the
item, then touch [ ] to return to previous
screen.
[Language]
Select the text language used
for on-screen information.
(Page 54)
• Touch [Language Select],
then select the desired
language.
[Clock]
Adjust the clock. (See the right
column.)
[Colour] Select the color of the
buttons on the monitor panel.
(Page 50)
• Touch [Panel Colour], then
select the desired color.
4
[Camera]
Configure settings for the
connected rear view camera.
(Page 28)
[DEMO]
Activate ([ON]) or deactivate
([OFF]) the display
demonstration. (Page 55)
2
Finish the procedure.
The Home screen is displayed.

Clock settings

1
Display the Home screen.
On the monitor panel:
2
Display the <SETUP> screen.
3
Display the <User Interface> screen.
4
Select the method to set the clock.
• Scroll the page to show the item.
[GPS-SYNC] Synchronizes the clock time with
the GPS.
[Manual] Sets the clock manually.
(Page 5)
• To close the window, touch [Close].
5
Select the appropriate time zone for [Time
Zone].
• To return to the Home screen, press HOME on
the monitor panel, or touch [
previous screen.
] to return to the