Table of Contents
Advertisement
Tuner
Listening to the radio
❏ Indications and buttons on the source
control screen
1
2 3
4
6
7
8
9 p q
Radio reception information
1 Preset no.
2 Current band
3 Seek mode (See the right column.)
4 Frequency/PS name
5 Preset list (Page 25)
6 Standby reception indicators (Page 26)
7 AF indicator (Page 27)
8 LO.S indicator (Page 25)
9 ST/MONO indicator: Lights up when receiving
an FM stereo broadcast with sufficient signal
strength.
p RDS indicator: Lights up when receiving a Radio
Data System station.
q EON indicator: Lights up when a Radio Data
System station is sending EON signals.
24
Operation buttons
[AUTO1]/
Changes the seek mode. Each time
[AUTO2]/
you touch the button, the seek mode
[MANUAL]
changes as follows:
• AUTO1: Auto search
5
• AUTO2: Tunes in stations in the
memory one after another.
• MANUAL: Manual search
[FM]
Selects the FM band (FM1 – FM3).
[AM]
Selects the AM band.
[TI]*
Activates/deactivates TI standby
reception mode. (Page 26)
[MONO]
Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
[PTY]*
Enters PTY search mode. (Page 26)
[
]
Attenuate the sound. (Page 6)
• To restore the sound, touch [
[S] [T]
Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[SSM]*
Presets stations automatically.
(Page 25)
[
]
Changes the settings for radio
reception on the <Tuner SETUP>
screen. (Pages 24 – 27)
* Appears only when FM is selected as the band.
❏ Setting the antenna control
You can store the antenna automatically when the
source is changed from the tuner to another source.
• The antenna is extended regardless of the setting
when the source is the tuner.
1
Display the <Tuner SETUP> screen.
2
].
[ON]
Select this to keep the antenna
extended even when the source is not
the tuner.
[OFF] Select this to store the antenna
automatically.
Advertisement
Table of Contents
