Other External Components; Using A Rear View Camera - JVC KW-V820BTM Instruction Manual

OTHER EXTERNAL COMPONENTS

Using a rear view camera

• To connect a rear view camera, see page 64.
• To use a rear view camera, a REVERSE lead
connection is required. (Page 61)
❏ Settings for the rear view camera
1
Display the <SETUP> screen.
On the Home screen:
• You can also display the <SETUP> screen by
touching [ ] on the source/option selection
screen. (Page 8)
2
Display the <Camera> screen.
28
3
Configure the camera settings.
Setting items
[R-CAM • ON (Initial): Displays the picture
Interruption]
from the rear view camera when
you shift the gear to the reverse
(R) position.
• OFF: Select this when no camera
is connected.
[Parking • ON (Initial): Displays the parking
Guidelines]
guidelines to enable easier
parking when you shift the gear
to the reverse (R) position.
• OFF: Hides the parking
guidelines.
[Guidelines
Adjusts the parking guidelines
Setup]* according to the size of the car,
parking space and so on. (See the
right column.)
* Selectable only when [Parking Guidelines] is set to [ON].
Adjusting the parking guidelines
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1
Touch [Guidelines Setup] on the
<Camera> screen. (See the far left
column.)
The guidelines settings screen is displayed.
2
Touch one of the marks to adjust (1),
then adjust the position of the selected
mark (2).
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Touch [Initialize] and after touch [Yes] to set
all the marks to the initial default position.