Cornwell Tools CAT4090 Operating Manual

OPERATING MANUAL
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
Disc/Cutting Wheel Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4"
Arbor Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8"
Horsepower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.8 HP
Free Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17,000 RPM
Guard Rotation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes
Overall Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0"
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.7"
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 Lbs.
Sound Pressure Level . . . . . . . . . . . . . . . . . . . . . . . . . . .80 dB(A)
Average Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . 3.5 CFM
Maximum Air Pressure . . . . . . . . . . . . . . . . . . 90 psig (6.2 bar)
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4"-18 NPT
Recommended Hose Size . . . . . . . . . . . . . . . . . . . . . . . . 3/8" I.D.
CAT4090
WARNING INFORMATION
•
WARNING
SPECIFICATIONS
-Save these instructions-
PARTS LIST
•
Copyright © Professional Tool Products, 2019
1
4" INLINE CUT-OFF TOOL
WARNING
• MAXIMUM RPM OF 17,000
• MAX. AIR PRESSURE:
90 PSIG, 6.2 BAR
RPM OF THE ACCESSORY
RPM RPM RPM
MUST EXCEED TOOL RPM
ALWAYS READ
INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR HEARING
PROTECTION
ALWAYS WEAR FACE
PROTECTION
ALWAYS WEAR HAND
PROTECTION
AVOID PROLONGED
EXPOSURE TO VIBRATION
All rights reserved
CAT4090
11/07/19