Table of Contents
Advertisement
Getting started
Setting the date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so that
you can use the alarm.
Calls
Date/Time
Date:
15.01.2013
Time:
00:00
Back
Date/Time
Date:
14.10.2013
Time:
07:15
Back
12
¤
Press the key Time below the display screen to
open the input field.
Time
(If you have already set the date/time, open the
input field via the menu:
v
The submenu Date/Time is shown on the
display.
¤
The active input position flashes.
Enter the day, month and year as an
8-digit number via the keypad,
e.g.
4
Q2Q
4
for 14.10.2014.
Save
If you wish to change the input position,
press left
key.
¤
Press the down control key to switch to the
time input field.
¤
Enter the hours and minutes in 4-digit format
via the keypad e.g., QM
5
for 07:15 am.
Change the input position with the control key
if necessary.
Save
¤
Press the key Save below the display screen to
save the entry.
Ï
¤
¤
¤
OK
Date/Time
u
v
or right
on the control
¤
OK)
bg cs en hr ro sk sl sr
Advertisement
Table of Contents
