Digital Display - Black & Decker CRISP and BAKE TOD6020B Use And Care Manual

STAN D BY/ P OWE R ON /PAU SE
Sleep Mode: When the oven is not in use, the digital display and start/stop light
are off. If the oven is not in use and the controls are not touched for 5 minutes, it
will go to sleep.
Standby Mode: When you press any of the buttons or turn any of the dials, the
digital display illuminates and the start/stop light flashes. This indicates the oven
is ready to be started. If the timer is at 0:00, the start/stop light will remain unlit
and you'll need to put time on the oven before starting the oven.
Power On: When you have selected your desired function and cook time and
press the start/stop button, the oven will power on and the start/stop light will
illuminate. After 30 seconds, the heating elements will glow. During operation, the
heating elements will cycle on and off to maintain the desired temperature.
Add Time: To add time while the unit is running, turn the time/temp knob to
add more time.
Change Temperature: To change the temperature while the unit is running
(in most functions), press the time/temp knob to toggle to the "TEMP" setting
then turn the time/temp knob to change the temperature.
Pause: When the start/stop button is pressed before the timer reaches zero, the
heating elements turn off. The start/stop light flashes. The display shows the
time left on the cooking cycle. To restart the cooking cycle, press the start/stop
button and the start/stop light illuminates and the timer starts again.
D IG ITA L DI SPLAY
When the digital display is showing temperature, "TEMP" is illuminated.
When it is showing time, "TIME" is illuminated. Toggle between showing time
and temperature by pressing in the time/temp knob.
Display while setting time: The display shows minutes
using the last two digits.
Display while cooking: For all functions, except for
dehydrate, the display shows minutes when above 20, up to
a maximum of 90 minutes. Below 20 minutes, the display
shows minutes and seconds.
7