Related Manuals for Bosch WVH30547EP
Summary of Contents for Bosch WVH30547EP
- Page 1 Washer dryer WVH30547EP WVH3057XEP en Instruction Manual and Installation Instructions...
- Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Customer service ... 35 Intended use Technical specifications ..35 For private domestic use only. ■ I n t e n d e d u s e The washer dryer is suitable for ■... -
Page 5: Safety Instructions
Safety instructions Warning Safety instructions Risk of scalding! Electrical safety When washing at high ■ S a f e t y i n s t r u c t i o n s temperatures, you may be Warning scalded if you touch the hot Danger of death! washing water Danger of death if live parts are... -
Page 6: Protection Of The Environment
Protection of the environment Warning Protection of the Risk of choking! environment When playing, children may become entangled in the Packaging/old appliance P r o t e c t i o n o f t h e e n v i r o n m e n t packaging/film and packaging parts or pull them over their Dispose of packaging in an... -
Page 7: The Main Points In Brief
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Insert mains plug. Open the door. Select the Programme Turn the tap on. programme, information in e.g.Algodón/... -
Page 8: Getting To Know Your Appliance
Getting to know your appliance Getting to know your appliance Washer dryer G e t t i n g t o k n o w y o u r a p p l i a n c e Hot air outlet 9T Close the door Control panel Service flap and cool air inlet... -
Page 9: Control Panel
Getting to know your appliance Control panel Change the default settings for the selected H Start the wash programme. Select the Inicio/ programme and select additional functions: Pausa+Carga (Start/Reload) button to start, interrupt (e.g. reload laundry) and cancel the ( Select a programme. The programme selector programme. -
Page 10: Display Panel
Getting to know your appliance Display panel Displays for the selected programme cold - 90°C Temperature in °C Prewash Washing Rinse Spin Drying Š Progress bar Programme duration after programme selec- 2:00* tion in h:min (hours:minutes). 1 – 24 h Finish in time in h (h=hour). - Page 11 Getting to know your appliance Displays for the selected programme Light dry (Auto). ª Timed dry, 5 drying durations can be selected, ...min exp: 120min* Drying time set manually. Load 7,0kg* Max. load for selected programmes. Overdosage On if too much foam detected, one rinse cycle Å...
-
Page 12: Laundry
Laundry Care label specifications: Laundry Cottons 95 °C, 90 °C < ; : 9 8 Coloureds 60 °C, 40 °C, P reparing laundry for washing 30 °C L a u n d r y B A > Easy-Care 60 °C, 40 °C, Sorting laundry according to: 30 °C Sort your laundry according to the care... -
Page 13: Preparing Laundry For Drying
Laundry Remove metal parts (paper clips, Notes ■ etc.). Before drying, hand-washed textiles ■ Trousers, knitwear and knitted must be spun at the appropriate spin ■ textiles, e.g. jersey garments, T-shirts speed. or sweatshirts, should be turned Before drying, spin at the optimum ■... -
Page 14: Operating The Appliance
Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance If you have activated the Note: Preparing the washer dryer childproof lock, you must deactivate it O p e r a t i n g t h e a p p l i a n c e before you can set a programme. -
Page 15: Adjusting The Washing Programme
Operating the appliance Adjusting the washing Note: After changing the programme default programme settings and/or additional functions, the programme duration may change. You can use the displayed default settings or adjust the selected programme optimally to the laundry Adjusting the drying items by changing the default settings programme or selecting additional functions. -
Page 16: Loading The Laundry
Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g. -
Page 17: Starting The Programme
Operating the appliance Position the measuring aid for Filling the dispensers measuring the correct amount of liquid Pull out the detergent drawer. detergent: Warning Pull out the detergent drawer. Press Eye / skin irritation! down the insert and fully remove the If the detergent drawer is opened drawer. -
Page 18: Reloading The Laundry
Operating the appliance Activating/deactivating: Touch and hold Changing the programme button 5 (Finish in) for approx. 5 s. If you have started the wrong The symbol E is indicated in the programme by mistake, you can display. If the button signal is activated, change the programme as follows: an acoustic signal sounds. -
Page 19: End Of The Programme
Operating the appliance End of the programme After washing/drying – 0 – and – – – is indicated in the Open the door and remove the display and acoustic signal sounds. laundry. Setting the signal ~ Page 27 Turn the programme selector to Ú... -
Page 20: Overview Of Programmes
Overview of programmes Overview of programmes Programme on the programme O v e r v i e w o f p r o g r a m m e s selector Programme/Type of laundry Options/Information Name of the programme maximum load Brief explanation of the programme and for which textiles it is suita- according to EN50229 ble for. - Page 21 Overview of programmes Programme/Type of laundry Options/Information max. 3,5 kg/2,5 kg Mixed load consisting of textiles made of cotton and synthetics. cold – 60°C – – – ... 1500 rpm SpeedPerfect G, EcoPerfect F, Rinse plus à, Stains e, 5, ª Delicado/Seda (Delicate/Silk) max.
- Page 22 Overview of programmes Programme/Type of laundry Options/Information Antialergias Vapor (HygieneCare) max. 4,0 kg/4,0 kg An innovative program, pretreat dry laundry by hot air (up to 70°C) to cold – 40°C for increased hygienic demands, followed by a low temperature – – – ... 1400 rpm washing cycle.
-
Page 23: Drying Table
Overview of programmes Drying table Cottons/coloureds (textiles made of cotton or linen such as underwear, T-shirts, sweaters, trousers, kitchen towels) Dry weight in kg 0,5 ~ 1,0 1,0 ~ 2,0 2,0 ~ 3,0 3,0 ~ 4,0 ~ 0,5 ~ 1,0 ~ 2,0 ~ 2,5 Estimated drying time in min Adjustable drying time in min ±... -
Page 24: Starching
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. You can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 25: Spin Speed)
Changing programme default settings Before the programme starts, the end of You can select desired auto drying the programme can be preselected in h mode: ± (Cupboard dry), 5 (Extra dry) steps up to maximum 24h. or ª (Light dry). When the programme has started, ±... -
Page 26: Ecoperfect F
Selecting additional functions Rinse plus à Selecting additional 8: Additional rinse cycle. For areas functions with very soft water or for an even better rinsing result. Select the desired additional option with S e l e c t i n g a d d i t i o n a l f u n c t i o n s the ¬... -
Page 27: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate setting mode for the signal volume Turn to Ú Off. Turn one position Touch and hold the ° C button + turn Release the button, clockwise. -
Page 28: Cleaning And Maintenance
Cleaning and maintenance Descaling Cleaning and Not required if detergent dosed maintenance correctly. However, if this does occur, follow the instructions of the descaling Warning agent manufacturer. Suitable descalers C l e a n i n g a n d m a i n t e n a n c e Risk of electric shock! can be purchased on our website or Danger of death if live parts are... -
Page 29: Drain Pump Blocked
Cleaning and maintenance Drain pump blocked Close service flap. If required, engage disengaged service flap beforehand. Warning Risk of scalding! To prevent unused detergent Note: Washing water is hot when washing at from flowing into the outlet during the high temperatures. You may be scalded next wash: Pour 1 litre of water into if you touch the hot washing water. -
Page 30: Filter In The Water Inlet Hose Blocked.30
Cleaning and maintenance Filter in the water inlet hose Air filter blocked blocked Turn the programme selector to Ú Warning Off. Pull out the mains plug. Open and remove the service flap. Danger of death! Take out the air filter. Do not immerse Aqua-Stop safety device in water (contains an electric valve). -
Page 31: Faults And What To Do About
Faults and what to do about them Caution! Faults and what to do Water damage about them Leaking water may cause damage. Do not open the door if you can still see Emergency release, e.g. if a water through the glass. F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Turn the programme selector to Ú... -
Page 32: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy The door cannot be opened after the drying programme due to the high tem- perature. The cooling down process will continue until the display disappears and the door can be opened. Flashes (no water supply): Tap turned on? Inlet filter blocked? ■... - Page 33 Faults and what to do about them Faults Cause/Remedy Spin result not satisfac- Not a fault – unbalanced load detection system has stopped the spin cycle, ■ tory. washing unevenly distributed. Distribute small and large items of washing in the drum. Laundry wet/too damp.
- Page 34 Faults and what to do about them Faults Cause/Remedy Drying duration extended. According to the air cooling principle, a higher ambient temperature will ■ result in poor drying performance, so the drying time will be extended. Ensure good ventilation to allow surplus heat to escape. Air inlet filter blocked? Clean the air filter~ Page 30 ■...
-
Page 35: Customer Service
Customer service Customer service Technical specifications If you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do about them ~ Page 32 T e c h n i c a l s p e c i f i c a t i o n s Dimensions 60 x 59 x 84,5 cm... -
Page 36: Consumption Values
Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Option Load (kg) Energy Water Programme consumption * Consumption duration *** ** (kWh) *** (Liter) (hours) Algodón/Algodão (Cot- 7,0 kg 0.23 kWh 73 l... -
Page 37: Installation And Connection
Installation and connection P Water supply hose on standard/ Installation and Aqua-Secure models connection depending on the model In addition, a hose clamp (24 - 40 mm Standard accessories diameter, available from specialist I n s t a l l a t i o n a n d c o n n e c t i o n dealers) is required to connect the Check the machine for transport Note:... -
Page 38: Installation Area
Installation and connection Installation area Installing the appliance under/ between kitchen units Stability is important to prevent Note: the washer dryer from wandering! Warning The installation area must be firm ■ Risk of electric shock! and level. Danger of death if live parts are Soft floors and floor coverings are ■... -
Page 39: Removing The Transportation Protection Devices
Installation and connection Removing the transportation protection devices Caution! Damage to the appliance Before using the washer dryer for the ■ first time, it is essential to remove all Insert the covers. Lock firmly by 4 transportation protection devices. pressing on the locking hook. Insert Keep the transportation protection the hose holder. -
Page 40: Connecting The Water
Installation and connection If the hose holders are used, the Water supply Note: possible hose lengths are reduced! Notes Available from dealer/customer Do not kink, crush, alter or cut ■ service: through the water supply hose Extension for Aqua-Stop or cold ■... -
Page 41: Water Drainage
Installation and connection Carefully turn on the tap and check Caution! that the connection points are not Damage to appliance/textiles leaking. If the end of the drainage hose is immersed in the drained water, water may be drawn back into the appliance and damage the washer dryer and/or textiles. -
Page 42: Drainage Into A Plastic Pipe With Rubber Sleeve Or Into A Gully
Installation and connection Drainage into a plastic pipe Electrical connection with rubber sleeve or into Electrical safety a gully Warning Connecting Risk of electric shock! Danger of death if live parts are touched. When disconnecting the main plug, ■ always pull the plug itself and not the cable, otherwise the cable could be damaged. -
Page 43: Before Washing/Drying For The First Time
Installation and connection Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked Fluff Clean l programme the first time ~ Page 30... - Page 44 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch, Hausgeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND...
Need help?
Do you have a question about the WVH30547EP and is the answer not in the manual?
Questions and answers