Table of Contents
Advertisement
TROUBLE SHOOTING
WHEN THE SWITCH IS IN THE "I" POSITION THE MACHINE WILL NOT START
Possible Cause
Electrical socket is faulty
Power cord is not plugged in
THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES
Water inlet filter is clogged
Pump is drawing air
Suction valves are clogged/worn
Black detergent nozzle is attached
Diameter of garden hose too small
Water supply is restricted
Insufficient water supply
THE PRESSURE CLEANER HAS OR WILL NOT MAINTAIN PRESSURE
Excessive air in waterline and pump
THE PRESSURE CLEANER MAKES EXCESSIVE NOISE
Filter is dirty
PARTS DIAGRAM
User replaceable parts listed below. All other parts must be
serviced/replaced by an authorised service agent.
Part
Description
1
Handle
2
Gun
3
Nozzle Holder
4
Lance
5
Hose Holder
Suggested Fix
Check plug, socket, fuses
Plug in power cord
Remove and clean filter
Tighten connections/bleed system
Clean or replace valves
Remove detergent nozzle and attach a high pressure nozzle
Replace with 12mm or bigger garden hose
Check hose for kinks or leaks
Fully open water source
Turn unit off / bleed system
Check, clean, or replace filter
Part No.
84 EW1450H
84 EW1450GT
84 EW1450NH
84 EW1450L
84 EW1450HH
STANLEY®, The STANLEY Logo, The Notched Rectangle and the Yellow and
Black Diagonal Package Design are all trademarks of the Stanley Black & Decker,
Inc or an affiliate thereof and are used under license. Product manufactured
and distributed by Smart Marketing Group Pty Ltd. Manufactured in China.
2
3
4
1
5
Advertisement
Table of Contents
