Timely: When suction is weakened
Regularly: approximately once a month
Request
Request
When washed with water...
Please do not use substances such as detergent, bleach, thinner or alcohol (To avoid cracks and colour change)
Remove rubbish from
When you want to wash the rotating brush with water
Rotate the brush cover so that
"
" may arrive at "
Lifting the
rotating brush
Take off the
belt
Reinstall
Put on the belt
Press the brush down
Make "
" arrive at "
When maintaining the nozzle, always close the vacuum cleaner and remove the nozzle.
(To avoid injury)
• Remove any water and dry completely (To avoid causing strong odours or clogs)
• Please do not use blow dryer or similar device to dry it (To avoid deformation and
malfunction)
Floor nozzle
Floor nozzle
areas
(Bottom)
"
Hold and remove
the brush cover
"
Cut with scissors along the gaps between
the brushes to remove tangled rubbish
Remove rubbish from
Wash the rotating brush with water
After washing, please fully dry
After washing, please fully dry
Pull out
Clamp the hole in the brush
cover into the claw
Install
areas.
Rotating brush only
EN13