Roland EV-1-WL Using Manual page 13

Items to Check
Is the unit paired
with "EV-1-WL"
or "EV-1-WL+"?
If you checked the above points and took the
appropriate measures but you still cannot connect,
try the following.
Items to Check
Try pairing again
Turn the power
off and on again
* If you've tried all of the above and still can't
connect, contact your dealer or a Roland
customer service center.
Cause/Action
When pairing, tap "EV-1-WL" in
Bluetooth MIDI Device setting on the
app, instead of Bluetooth setting on
your mobile device. When you turn
the Bluetooth switch of your mobile
device on, "EV-1-WL" or "EV-1-WL+"
might appear in the devices list, but
you should not tap them. If you did
accidentally tap them, follow the steps
shown in "Quit all apps on your mobile
device, and retry pairing" (p. 14).
Cause/Action
Following the instructions in "Quit
all apps on your mobile device, and
retry pairing" (p. 14), " quit all apps
currently running on your mobile
device and try pairing again.
Follow the instructions in "Turn the
mobile device and the EV-1-WL off and
then on again" (p. 15) to try pairing
again.
13