Operating Notes - Impex Marcy MWB-60205 Owner's Manual

CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out of use until
repair.
6. Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum weight capacity on Bench including user weight: 600 lbs.
2. Maximum weight capacity on Bar Catch: 300 lbs.
3. Maximum weight capacity on Leg Developer: 100 lbs
4. Maximum weight capacity on weight storage Post of each Rear Support (#4): 150lbs
5. Assembled dimension (L x W x H): 73"x61"x58"

OPERATING NOTES

1. Rack and Bench should be placed on flat surface. The incline or decline of surface
should be limited to a 3% or less for best performance and safety.
2. Use the Incline Support (#13) to select the Backrest Incline. Ensure the Incline Support is
securely placed on the support slot.
3. Use the Lock Knob (#48) to lock the selected Arm Curl in position.
4. Use Ø 1 ⅞" Spring Clip (#51) to lock Olympic plates in position.
©IMPEX INC.
7
www.marcypro.com