The warning labels shown here have been placed on the Cross Brace and Rear Base. If the labels are missing or
illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown.
IMPORTANT ASSEMBLY INFORMATION
❖
Tools required for assembling the bench: adjustable wrench and Allen wrench.
❖
NOTE: It is strongly recommended that this equipment be assembled by two or more
people to avoid possible injury.
❖
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
❖
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to
be assembled.
❖
Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
Fasten Nuts and Bolts
©IMPEX INC.
Securely tighten all nuts and bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivoting function.
Make sure all pivoting components are able to move
freely.
Do not tighten all nuts and bolts in this step.
6
www.marcypro.com