Elgee Power-Vac 632-E Owner's Manual page 6

HANDLE
5/16" FLAT
WASHER (2)
5/16" HEX NUT (2)
2.
Slide the Handle onto the Right and Left Handle Legs and
attach with two hex-head machine screws, flat washers, and
hex nuts as shown in the illustration. The two holes nearest
the bend must be on the right side of the machine when
viewed from the operator's position.
5/16" X 1-1/4" HEX
HEAD SCREW (2)
RIGHT HANDLE LEG
5
LEFT HANDLE LEG