Hands-Free Setup - Kenwood DDX9018S Instruction Manual

Bluetooth Control

Hands-Free Setup

You can make various settings for the Hands-
Free function.
1
Press the [MENU] button.
h Popup menu appears.
h
2
Touch [SETUP].
h SETUP Menu screen appears.
h
3
Touch [Bluetooth].
h Bluetooth SETUP screen appears.
h
4
Touch [TEL SETUP].
h TEL SETUP screen appears.
h
5
Set each function as follows.
[Bluetooth HF/Audio]
■
Select the speakers to output the sound from
the cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
[Front]: Outputs sound from the front
speakers.
[All ](Default): Outputs sound from all
speakers.
52
[Auto Response]*
■
Set the automatic response time to pick-up
an incoming call.
[OFF ](Default): Turns off the Automatic
response function.
[1]/ [5]/ [10]/ [15]/ [20]/ [25]/ [30]: Sets the
ringing time (second).
[Auto Pairing]
■
When set to "ON", the Apple Auto Pairing
function is turned on to automatically
register the iPod touch or iPhone connected
to this unit.
[ON ](Default): Turns on the Apple Auto
Pairing function.
[OFF]: Turns off the Apple Auto Pairing
function.
[Sort Order]
■
Set how to sort the data in the cell-phone
phonebook.
[First]: Sorts data by the first name.
[Last ](Default): Sorts data by the last name.
[Echo Cancel Level]
■
Adjust the level of echo cancellation.
Default is "0".
[Noise Reduction Level]
■
Reduce the noise generated in the
surrounding environment without changing
the microphone volume. Use this function
when the voice of caller is not clear. Default
is "0".
* Either the auto response time set on this
unit or the time set on the cell-phone,
whichever is shorter takes effect.
6
Touch [OK].