Vax PowerJet Pro V-028U Instruction Manual page 7

V-028U User Guide v2.qxd:V-028U User Guide
Carpet Cleaning
Fill remainder of clean water tank with warm (max 50ºC)
tap water. Replace cap (Fig.4/4).
Fig.4/4
Place bottom of clean water tank into carpet washer and
rotate top into position until the clean water tank.
Latch snaps into place (Fig.4/5).
Fig.4/5
Plug cord into electrical socket.
Step on the power on/off pedal to turn cleaner on
(Fig.4/6).
Fig.4/6
NOTE: Never leave unit unattended with power on.
Turn off when emptying and filling tanks.
Do not oversaturate the carpet.
Step onto handle release pedal to put into cleaning
position (Fig.4/7) .
12/3/08
All manuals and user guides at all-guides.com
09:11 Page 7
Fig.4/7
Whilst depressing solution spray trigger, push carpet
washer in a forwards motion. Release trigger and pull unit
backwards in same path to remove dirty water and
solution from the carpet.
(For heavily soiled areas, repeat if necessary) (Fig.4/8).
IMPORTANT: For best cleaning results use a
!
steady, moderate, forward and backward
motion.
IMPORTANT: If the sound of the motor changes
!
to a high pitch, this indicates the dirty water
tank is full and must be emptied.
Fig.4/8
cleaning upholstery and stairs
Put carpet washer in its upright position, then turn off
(Fig.4/9).
Fig.4/9
Vax Careline 0870 606 1248
7
operation