Vax PowerJet Pro V-028U Instruction Manual page 4

V-028U User Guide v2.qxd:V-028U User Guide
www.vax.co.uk
3. Assembly
Putting your cleaner together
Stand base in upright position.
Push mid-section onto base by aligning tabs on inside of
mid-section with the pockets on the base (Fig.3/1)
mid-section
tabs
Fig.3/1
Insert 4 lower handle/tool caddy screws and tighten until
secure (Fig.3/2).
Fig.3/2
Slide upper handle down onto unit (Fig.3/3).
upper handle
Fig.3/3
Insert the upper handle screw (as shown) and tighten
until secure (Fig.3/4).
NOTE: Make sure the power cord is out of the way to
avoid pinching.
4
assembly
All manuals and user guides at all-guides.com
pockets
cord
base
back view
12/3/08 09:11 Page 4
Fig.3/4
Caddy Assembly
Align tool caddy with screw holes on mid-section and
base (Fig.3/5).
Fig.3/5
Insert the three (3) tool caddy screws and tighten until
secure (Fig.3/6).
Fig.3/6
back view