Related Manuals for Vax Pet VX38
Summary of Contents for Vax Pet VX38
- Page 1 VACUUM CLEANER CYCLONIC BARREL VACUUM LET’S GET STARTED. vax.com.au VX38 vax.co.nz...
-
Page 2: Let's Talk Safety
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. READ ALL THE INSTRUCTIONS BEFORE USING Basic THIS APPLIANCE safety • Only use the vacuum cleaner indoors and keep the area you’re precautions cleaning well lit. - Page 3 • Only Vax recommend tools and accessories should be used with this vacuum cleaner • Vax recommends the use of a Residual Current Device rating of 30 mA or less. • If the supply cord is damaged, it must be replaced by the manufacturer, or similarly qualified person in order to avoid a hazard, or invalidating the warranty.
- Page 4 Maintaining your carpets will ensure they keep their appearance for longer. You’ve chosen the carpets and hard floors for your home for a reason and Vax will help you take good care of them.
-
Page 5: Table Of Contents
Contents Pet Barrel Vacuum Included with your machine Let’s talk safety Getting to know your machine Hose and handle Getting started Dusting brush Using your machine Crevice tool Taking care of your machine What to do if it goes wrong Upholstery tool Getting in touch Combination floor head... -
Page 6: Getting To Know Your Machine
Name Pet Barrel Vacuum Filter pack* VCP6BFLT Voltage 220-240V ~ 50Hz Wattage 2000W Cord length 7m Weight 5.5kg Double This product Indoor Read Insulated meets applicable Instructions regulatory requirements Subject to technical change without notice. To purchase consumables and accessories, please visit vax.com.au... -
Page 7: Getting Started
CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. Keep you Vax like new IMPORTANT: The condition of the filters affects the performance of your machine. Please check, clean and replace filters periodically (depending on the level of use). -
Page 8: Using Your Machine
Using your machine Operating the appliance Fully unwind the power cord. Adjust the variable power dial to A yellow mark on the cord increase or decrease the suction. indicates the recommended cord length. Do not exceed the cord length beyond the yellow mark. -
Page 9: Taking Care Of Your Machine
Taking care of your machine WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container or before connecting/disconnecting the attachments. IMPORTANT: Filters need to be cleaned everytime you empty the dirt container for best cleaning results. Do not use your vacuum cleaner with blocked filters and without ALL the filters in place. - Page 10 Taking care of your machine Cleaning the pre-motor filter IMPORTANT: Water temperature should not exceed 40°C when washing the pre-motor filter. Allow to dry completely before replacing in the vacuum cleaner. Tap to remove excess dirt for a quick clean. 40�C max 24hr Wash when a deeper clean...
- Page 11 Taking care of your machine NOTE: The shroud is accessed by removing the dirt container lid and is located underneath the pre-motor filter. IMPORTANT: Water temperature should not exceed 40°C when washing the shroud. Allow to dry completely before replacing in the vacuum cleaner. Cleaning the shroud 40�C max 24hr...
- Page 12 Taking care of your machine Cleaning the post-motor filter WARNING: Do not wash post-motor filter. Tap to clean. Clearing blockages WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks. Turn the vacuum cleaner off and unplug from the electrical socket. Hose blockages Accessory blockages The flexible hose may be disconnected from the vacuum...
- Page 13 Taking care of your machine Removing blockages from the Turbobrush Switch the vacuum cleaner off and disconnect the power plug from the electrical outlet. Lay the Turbobrush on a flat surface and turn over to expose the brushbar. Using a pair of scissors, cut through any threads or hairs caught around the brushes and brushbar.
-
Page 14: What To Do If It Goes Wrong
• We’re here to help. Simply call AUS: 1300 361 505 What do I do if the unit/ / NZ: 0800 800 900 or visit vax.com.au an accessory becomes damaged or broken? •... -
Page 15: Getting In Touch
Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. -
Page 16: Accessories
Accessories Don’t forget your accessories! Order at: www.vax.com.au / www.vax.co.nz Pro Cleaning Kit Model no. VPCK Crevice tool For awkward gaps and crevices. Upholstery attachment Gently cleans large areas of upholstery, curtains, sofas and chairs. Pet hair removal attachment Tackles stubborn pet hair on furniture, rugs and carpets. - Page 17 Notes...
- Page 18 Notes...
- Page 19 Notes...
- Page 20 Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. Careline AU: 1300 361 505 www.vax.com.au Careline NZ: 0800 800 900 www.vax.co.nz...
Need help?
Do you have a question about the Pet VX38 and is the answer not in the manual?
Questions and answers