Monitoring Device Installation - Recom RCM SP-D Series User Manual

Figure 4-18 Grounding terminal connection

4.4 Monitoring Device Installation

RECOM RCM 3.0~6.0-SP-D series single phase inverter supports WiFi, GPRS and RS485
communication, you can choose according to your specific needs.
Plug the WiFi or GPRS module into the COM1 port in the bottom of inverter by following the
direction the side with indicator is up (as shown in Figure 4-19). A slight "click" sound during
the installation represents that the assembly is in place.
Figure 4-19 Monitoring device installation
22