Recom RCM SP-D Series User Manual page 19

7) Insert the positive and negative connectors into the inverter DC input terminals respectively,
and when you hear the "click" sound represents the assembly in place, as shown in Figure 4-12:
RCM-3SP-D
4.3.2 Connection of AC output
The RECOM RCM 3.0~6.0-SP-D series single phase inverter applies to the single-phase power
grid with a voltage of 220/230V and a frequency of 50/60Hz.
The recommended cable and AC breaker for the RECOM RCM 3.0~6.0-SP-D series single phase
inverter are shown in the following table:
Model
RCM-3.0-SP-D RCM-3.6-SP-D RCM-4.2-SP-D RCM-4.6-SP-D RCM-5.0-SP-D RCM-6.0-SP-D
Cable
Breaker
Warning
4.3.2.1 AC connector connection steps
1) Take the AC connector out of the accessory bag and disassemble it, as shown in Figure 4-13:
C ab le Gl an d
4mm 4mm
2 2
20A 25A
An AC breaker must be connected on the AC side of the inverter.
Any loads cannot be directly connected to the inverter.
Threa d e d Sl ee ve
Figure 4-12
4mm 4mm
2
32A 32A
Figure 4-13
6mm
2 2
40A
AC Ter mi n al H ea d
6mm
2
40A
19