Display Interface - Recom RCM SP-D Series User Manual

3.3 Display Interface

Item Indicator
Power
1
Indicator
Alarm
2
Indicator
OLED
3
Display
4 Button
12
Figure 3-6 Display interface
Status
Off
No input voltage detected or input voltage is too low.
Slow flashing
Inverter powered on, waiting for the grid connection.
Quick flashing
Inverter detected grid power and entered self-test status.
Always on
Normal, grid-connected and power generated.
An alarm or fault is detected, and the display can view the specific
Always on
fault information.
Off
The inverter is running normally.
The monitoring device is not connected to the router or is not
Slow flashing
connected to the base station.
The monitoring device is connected to the router or connected to
Quick flashing
the base station but not connected to the server.
On
Display the inverter operating information.
If the button pressed without any response, the screen is faulty or
Off
not well connected.
Physical
Switch OLED display information and set parameters by short
button
press and long press.
Description