Gree GWH18QD-K3DNA3G Service Manual page 107

Step
2. Remove grille and cabinet
a Remove the 4 screws connecting the grille and
outer case, and then remove the panel grille.
b Remove the screws connecting the outer case
with motor support, isolation plate and chassis;
lift the outer case upwards; loosen the clasps
of outer case with right side plate and left side
plate, and then remove the outer case.
3. Remove rear guard grille and right side plate
Remove the 3 screws connecting the grille with
a
right side plate and left side plate, and then
remove the rear guard grille.
Remove the screws connecting the right side plate
b
with electric box assy, valve support, chassis and
condenser side plate, and then remove the right
side plate.
104
Procedure
screws
grille
screws
screws
screws
screws
Service Manual
cabinet
screw
rear guard
grille.
screws
right side plate
Installation and Maintenance