UsingTheShaver - Panasonic ES‑RT25 Operating Instructions Manual

1
1
Inserttheapplianceplugintothe
shaver.
2
2
Plugintheadaptorintoahousehold
outlet.
The charge status lamp ( ) glows red.
• Turn the shaver off before inserting.
• If you charge the shaver with power switch turned on, it will start
working when you remove from the AC adaptor.
• The charging time may decrease depending on the charging
capacity.
• The charge status lamp (
adaptor is disconnected from a household outlet.
• Recommended ambient temperature for charging is 0 – 35 °C.
The battery may not charge properly or not at all under extreme
low or high temperatures.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp
( ) may not glow for a few minutes, or the operating time may
shorten. Please charge it for more than 16 hours in such cases.
3
3
Disconnecttheadaptorafterchargingis
completed.
• Charging the battery for more than 8 hours will not affect
battery performance.
Note
You cannot operate the shaver while charging.
1
) glows and stays on until the

Usingtheshaver

2
►Dryshaving

1
1
Pressthepowerswitch.
2
2
Holdtheshaverasillustratedand
shave.
• Start out shaving by applying gentle
pressure to your face. Stretch your skin with
your free hand and move the shaver back
and forth in the direction of your beard. You
may gently increase the amount of
pressure as your skin becomes
accustomed to this shaver. Applying
excessive pressure does not provide a
closer shave.
►Wetshaving

After wet shaving, be sure to wash the main body with water.
1
1
Applywater,soap,shavingfoam,
etc.ontheface.
2
2
Pressthepowerswitch.
3
3
Shavewithslowandsmooth
motionsasillustrated.
9