Mode Set (Dvd Deck) - JVC HR-XVC27U Instructions Manual

Mode Set
(DVD deck)
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
You can change various mode settings on the Mode Set
screen by following the procedure described below.
● For each mode setting, see pages 78 to 80.
LANGUAGE
PICTURE
AUDIO
OTHERS
MENU LANGUAGE ( pg. 22)
AUDIO LANGUAGE ( pg. 22)
SUBTITLE ( pg. 22)
ON SCREEN LANGUAGE (
MONITOR TYPE ( pg. 18, 78)
PICTURE SOURCE ( pg. 78)
SCREEN SAVER ( pg. 78)
FILE TYPE ( pg. 78)
DIGITAL AUDIO OUTPUT (
DOWN MIX ( pg. 79)
D. RANGE COMPRESSION (
RESUME ( pg. 80)
ON SCREEN GUIDE ( pg. 80)
PARENTAL LOCK ( pg. 58)
● The procedure shows how to set "RESUME" to "ON"
on the DVD Set Up menu screen as an example.
A
Turn on the unit.
Press POWER (1).
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C
Access the DVD Set Up menu screen.
A Press SET UP.
B Press w e to select
" OTHERS".
● Each time you press the
button, the setup menus
change as follows;
LANGUAGE]
](Back to the beginning)
D
Select the mode.
Press rt to move the hightlight to "RESUME", then
press ENTER.
E
Select the mode setting.
Press rt to select "ON", then press ENTER.
F
Return to the normal screen.
Press SET UP.
pg. 21)
pg. 78)
pg. 79)
OTHERS
RESUME
ON SCREEN GUIDE
PARENTAL LOCK
SELECT
USE
TO EXIT, PRESS [SET UP].
ENTER
PICTURE] AUDIO ]
77
EN
ON
ON
TO SELECT, USE OK TO CONFIRM.
OTHERS