Table of Contents
Advertisement
∫ About security
Be careful about the possibility of theft or loss of the unit,
and be careful not to leave the unit unattended. Please
note that Panasonic does not accept any responsibility
for the compromise, manipulation, and loss of
information caused by these events.
∫ Caution regarding laser beams
The lens may suffer damage if struck by a laser beam.
Make sure that laser beams do not strike the lens when
shooting in an environment where laser devices are
used.
∫ Cards that you can use with this unit
SDHC Memory Card and SDXC Memory Card
≥ 4 GB or more Memory Cards that do not have the
SDHC logo or 48 GB or more Memory Cards that do
not have the SDXC logo are not based on SD Memory
Card Specifications.
≥ Refer to page 46 for more details on SD cards.
∫ For the purposes of these operating
instructions
≥ The battery pack is referred to as the "Battery".
≥ SDHC Memory Card and SDXC Memory Card are
referred to as the "SD card".
≥ Function that can be used for CAM Mode:
Function that can be used for SDI Mode:
Function that can be used for Playback Mode:
≥ An image created by one recording operation is called
a "Clip" and is described as such.
≥ The Compact Camera Head (AG-MDC20G) sold
separately is described as "Camera Head".
≥ Clip(s) to be recorded or that was recorded with
[PRIORITY MODE] set to [REC/PB(4K)] →"MP4
clip(s)"
≥ Clip(s) to be recorded or that was recorded with
[PRIORITY MODE] set to [REC/PB] →"AVCHD clip(s)"
≥ Notation of < > indicates the setup item name of the
USER button that can be set with the menu of [USER
SW]→[USER1] to [USER13].
≥ Pages for reference are indicated by an arrow, for
example: l 00
≥ For the purposes of this manual, the model numbers of
the units are given as listed in the table below.
Model number of unit
AG-MDR25P
AG-MDR25E
AW-RP50N
AW-RP120G
AK-HRP200G
≥ These operating instructions are designed for use with
models AG-MDR25P/AG-MDR25E. Such as screen
illustrations are as an example AG-MDR25P.
36
DVQX1265
SDI
Model number given in
manual
AG-MDR25
AW-RP50
AW-RP120
AK-HRP200
∫ About Condensation
(When the lens of the Camera Head or
the LCD monitor of this unit becomes
cloudy)
Condensation occurs when there is a change in
temperature or humidity, such as when the unit is taken
from outside or a cold room to a warm room. Please be
careful, as it may cause the lens, the viewfinder or LCD
monitor to become soiled, moldy, or damaged.
When taking the unit to a place which has a different
temperature, if the unit is accustomed to the room
temperature of the destination for about one hour,
condensation can be prevented. (When the difference in
temperature is severe, place the unit in a plastic bag or
the like, remove air from the bag, and seal the bag.)
When condensation has occurred, remove the battery
and/or the AC adaptor and leave the unit like that for
about one hour. When the unit becomes accustomed to
the surrounding temperature, fogginess will disappear
naturally.
Advertisement
Table of Contents
